How to Remove Shower Doors video. How to Remove Shower Doors video. Removing Shower Doors Is Much Easier Than You Think. If you've ever wanted to get rid of your old shower doors, and replace them with a curtain, it's much easier to do than you think. There are many good reasons to switch them out: some are leaky, or collect mold. They also get in the way of cleaning and bathing kiddos. A curtain eliminates all of these things, and can be thrown in the wash when it gets too dirty. Plus, when the curtain is left open when not in use, the bathroom feels so much larger than before. Don't be daunted by the idea of leaving holes in the walls, you'll be happy you took the plunge!
What you need to remove your shower doors and caulk mold is a Screwdriver or power drill. Scraper, razorblade, caulk remover. I used Goo Gone just because that is what I had in the house. Curtain Rod and shower curtain. I use drapery panels for length and elegance. Start by remove Shower Doors From the Track, Mine lifted up and out from a top track. Next, Remove Screws From the Shower Door Frame. My frame had three screws on each side and zero in the bottom track (jackpot!). Now you want to Carefully Cut Any Caulked Joints. Use your utility knife to break the seal between the frame and the walls and tub. Be sure to hold the knife parallel to the wall and tub, not perpendicular. You don't want to leave cuts in the wall and tub surfaces, you just want to separate the frame from the wall. Pop Off the Top Track. Mine was not attached to the rest of the frame at all, it was only sitting in place on top of the side frames. A simple jolt with the palm of my hand loosened it and it lifted out easily. Remove the Side Frames. Have your utility knife handy in case you need to cut a little more caulk as you pull the frames from the walls. There will be caulk left behind on the tile, but don't worry. Finally, Remove Bottom Rail from the Tub. Prepare yourself - this is going to yucky! But this moment is also liberating; seeing your tub free of cumbersome metal frames. Think of it as having braces removed!
Scrape Up Excess Caulk
This is where the razor blades can come in handy - I found it most effective in scraping up the discolored caulking left behind once the door frames were removed. You likely won't get all of the caulk removed in this step, but that's okay! Just get as much as you can without damaging any surfaces.
Reveal your new CLEAN, MOLD FREE space by hanging that glorious new rod and curtain!
Helpful hint: Attach curtain hangers to the curtains before stringing them onto the rod. This way, you aren't tottering up on the edge of the tub wrestling twelve grommets onto clips.
ALL OF MY TOOLS ANS SUPPLIES ARE FROM HOME DEPOT!
Tags: How to Remove Shower Doors video, removing shower doors from shower stall, removing sliding shower door with bottom glides, how to remove shower door track, silicone caulk, imovie, removing shower doors replace with curtain, runway done my way, shower doors, silicone caulk mold, how to remove shower doors, how to, how to hottie, shower, how to remove